Setting up a Brick Paver Walkway or Brick Tile Accessories

Making use of Installing a Brick Paver Walkway or Common Bricks or Pavers to produce a walkway or patio area matches a home in a manner in which is unequaled. It adds a level of quality and sophistication to a home entrance that can not be achieved with either concrete or asphalt. Brick and Pavers also are available in several colors and shapes permitting unique color plans and patterns to be attained. In addition, setting up a Brick or Paver sidewalk does not always need a pro. With some standard knowledge and a reasonably basic pathway plan, a property owner can carrying out such a project.

The key to setting up a Brick or Paver Walkway is to first effectively prepare the area where the bricks/pavers are to be installed. The area needs to be dug out at least a foot down, eliminating all topsoil and clay soil. In addition, string lines need to be strung on each side of the pathway. The string lines indicate the ended up height of the sidewalk.
Once the location has been dug, 3/4" gravel stone should be laid in and tamped down securely. Then 2" of sand, or stone dust need to be spread out over the gravel. Once again the sand/stone dust should be tamped down. Stone dust is chosen. The height between the tamped down sand and the stringline must equal the thickness of the brick or paver.

Now that you have a stable base, position a 1" pipeline or ledger board the length of the sidewalk on either side of the pathway. Then using a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will create a level area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Install a work on both sides of the ready location. These strips will act as your pathway border and help to preserve the stability and shape of the walkway. You can get these plastic strip borders at a lot of house improvement stores. The strips ought to be anchored down with 12" galvinized nails. You ought to sink these nails into the ground and through the strips every foot.

The secret to laying the bricks/pavers is to make sure that they interlock with each other. Always stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will again help maintain the integrity of the pathway.

Inevitably bricks/pavers will need to be cut or divided when developing the pathway. To actually cut/split the brick/paver, lay it in a bed of sand and location the sculpt at a 75 degree angle over the spot where you want to break the brick. If your sidewalk has curves you will need to buy/rent a wetsaw.

After installing the bricks, develop the outdoors edges with additional sand, and then shovel in the topsoil and pack down strongly.
Spread stone dust over the new pathway and sweep into the fractures. This will finish the interlocking of the bricks and help to remove any weed brick block concrete growth.


In addition, setting up a Brick or Paver pathway does not necessarily need a pro. The secret to installing a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be set up. Now that you have a stable base, place a 1" pipe or ledger board the length of the walkway on either side of the sidewalk. These strips will act as your walkway border and assistance to preserve the integrity and shape of the pathway. Undoubtedly bricks/pavers will need to be cut or divided when building the walkway.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Setting up a Brick Paver Walkway or Brick Tile Accessories”

Leave a Reply

Gravatar